Faulhaber coreless dc motors available from IMS deliver precision performance in a small package.  These motors interface directly with the MC-CQ-B motion controller and IMS Motion Console software.  Combinations in bold are normally stocked. 

An extensive line of dc motors compatible with the MC-CQ and MCDC motion controllers is also available from Micromo Electronics.  Motors ordered from Micromo for use with the MCDC3003/3006 and MC-CQ-B controllers must be selected for compatibility with the MCDC3006 controller type as stated in Micromo's "works with" section for the given motor.  Upon request, Micromo can also configure their 10 and 12 mm coreless dc motors for operation with MCDC3003/3006 and MC-CQ controllers.  Motors ordered for use with the MC-CQ controller should be wired as shown in the IMS motor specification sheet.    

 

Motor Type

Motor Diam. mm

Available Encoders

Enc

Diam.

mm

Available Gears1

Gear

Diam.

mm

Motor No Load Speed

Up To2

rpm

Motor Stall Torque Up To2

mNm

PDF
1016 10

40 ct/rev

48 ct/rev

 10 4:1, 16:1, 64:1, 256:1, 1024:1, 4096:1 10 18,400 0.87

motor

data
1024 10

40 ct/rev

48 ct/rev

 10 4:1, 16:1, 64:1, 256:1, 1024:1, 4096:1 10 14,700 2.34

motor

data
1331 13

40 ct/rev

48 ct/rev

64 ct/rev

 16 3.71:1, 14:1, 43:1, 66:1, 134:1, 159:1, 246:1, 415:1, 592:1, 989:1, 1526:1,2608:1, 4365:1, 5647:1 14 12,000 8.49

motor

data
1524 15

40 ct/rev

48 ct/rev

64 ct/rev

 16 3.71:1, 14:1, 43:1, 66:1, 134:1, 159:1, 246:1, 415:1, 592:1, 989:1,1526:1, 2608:1, 4365:1, 5647:1 16 12,000 2.34

motor

data
1724 17

40 ct/rev

48 ct/rev

64 ct/rev

 17 3.71:1, 14:1, 43:1, 66:1, 134:1, 159:1, 246:1, 415:1, 592:1, 989:1, 1526:1, 2608:1, 4365:1, 5647:1 16 8,600 10.5

motor

data

1. For maximum gear life, recommended max gear input speed is 5000 rpm

2. Parameter applies to motor output, not gear output